![max msp xy pad max msp xy pad](http://www.runxt.be/bestanden/fotos/medium/41e1dc4deecf98a7a56605e12e97095d.png)
Then by pressing and holding the paste button and one of pads or slots you saved a sequence will restore and overwrite the currently active instrument's velocity or pitch sequence. Pitch copy/paste and Amp copy/paste:īy Pressing and holding down the copy button and a pad, you can copy one velocity or pitch sequence of all 16 pads or notes of the currently selected instrument/channel into an internal memory. You can reset the playhead to starting position by pressing the playhead rst button making it easy to beat-match with existing audio material. Alternatively you can tap the tempo with the tap tempo button, or adjust with the rotary if in dj mode. The BPM buttons change the BPM up and down as displayed on the 7-segment LCD on the padkontrol. The XY pad controls the pitch, the x dimension controls coarse and y the octave of the selected pad/note if in pad mode or the instrument/channel if in sequence mode. If in Sequencing mode they change the velocity and pitch of the instrument | channel, if in pad mode they control the selected pad, same as with the rotary. Knob 1 is for velocity and Knob 2 is for pitch. The Knobs are "hardwired" to velocity and pitch.
MAX MSP XY PAD PATCH
samp changes the sample loaded in for the selected channel or instrument (one rectangle on the _sequencer patch corresponds a channel).The rotary button is changing the values depending on what you have assigned to it next to it: I use it for switching on and off pre-programmed effects, a better implementation would be nice at some point. If the FX button is pressed the pads will send a 127 - 0 MIDI CC toggle to the vst. This mode is a work in progress, you need to be able to edit the patch to use this with your own vst (full version of Max/MSP). You can go back to the Sequencing or inst mode by pressing the pad mode button again, or by pressing the inst mode button. Holding the pad mode button while pressing a pad on the padkontrol switches to that pad/note, as displayed on left side of the padkontro patch. You can go into pad mode by pressing the pad button( message on the padkontrol hw). One pad corresponds for one note in the sequencer triggers. When you are in pad mode, you can change the properties of individual pads. Instruments go from 1-16 the same way as pads on the padkontrol (top-left to bottom-right). You can change instrument channels by pressing and holding the inst button and pressing a pad at the same time. You can change instruments or go back to Sequencing mode by pressing the inst button. The selected instrument is displayed on the left of the _padkontrol patch. If you are in Sequence mode, the rotary and the knobs change the values of the selected instrument. You can add notes by pushing them and delete pressing again. You can switch between modes by pressing any of the mode buttons.
![max msp xy pad max msp xy pad](http://lh3.ggpht.com/_S9tCNvdm3tU/S8r1-hRatyI/AAAAAAAADMk/Iuc9NEFWq9g/s400/screen%EF%BC%882010-04-18%2021.06.44%EF%BC%89.jpg)
One instrument is a channel, each represented by one of the 16 radio buttons on the left of the _padkontrol patch and by 16 channel in the _sequencer patch.
![max msp xy pad max msp xy pad](https://d29rinwu2hi5i3.cloudfront.net/article_media/8ed75d31-7a19-4ce6-b2c3-65683e0495eb/08_xy_pad.jpg)
Click your pads on the padkontrol and you should hear them playing back.Drag and drop a folder containing audio samples to the drop area on the first channel(samples in subfolders wont load sorry).
![max msp xy pad max msp xy pad](https://theproaudiofiles.com/wp-content/uploads/2021/04/NI-Thrill.jpg)
Who-whoo! Your LEDs should blink on the padkontrol.If it doesn't, switch it off then on again.If you have set your dsp settings in maxmsp properly (Options->DSP status) then your sequencer should start up. Inside the _sequencer.maxpat click the speaker icon on the top-right.If you turn the knobs or touch the x-y controller the maxmsp patch should follow.The 7 segment LEDs on your padkontrol should now go off.Click the Set button if the ports has not been set automatically or set them using the dropdowns to padKONTROL PORT A for input and padKONTROL CTRL for output.This GUI can be used to emulate the padKONTROL hardware and display settings for the sampler / sequencer Only required if you need hardware control) Step by step guide using the padkontrol sequencer: The sequencer comes with an emulated padKONTROL interface and therefore works in standalone without an actual padKONTROL hardware connected through USB / MIDI.
MAX MSP XY PAD MAC OS
Tested with MaxMSP v5, v6 and v8 on mac OS 10.15 Catalina. Korg padKONTROL KPK-1 sample accurate audio sample step sequencer for Max/MSP 5+